Knowledge of pipe mold:

I. Purpose of pipe mold:

The pipe mold is mainly used for the production of stainless steel profiles, copper, aluminum, iron profiles and high-frequency welded pipes. Quality determines whether a product is good or bad.

Two, the working principle of the pipe mold:

Tube die

The steel strip is sent to more than 4 sets of coiled tubular molding die, then welded into tubular shape by argon arc welding or high frequency welding in the welding area, then pressed into standard size more than 2 sets of molding die, and then cut with a fixed size wound or cut. There are many ways to determine the size, such as a simple point at a certain length of the discharge port on the micro switch, extending the tube to the switch after the trigger circuit control cutting wheel action to cut the tube.

Iii. Type of pipe mold:
Round tube mould, square tube mould, plum tube mould, round head flat tube mould, oval tube mould, fan tube mould, octagonal tube mould.

Four, mold production process
Blanking - rough processing - heat treatment (high temperature quenching, high temperature tempering) - finishing - nitriding - finished products
Five, pipe mold classification

Tube die
(1) Horizontal mold: mold with axle hole and keyway
(2) Mold: bearing mold
Vi. Pipe specifications
1. Round tube
Specification :Φ325 Material :5 ~ΦCr12MoV/Cr12 Tolerance range: roundness + 0.025 Hardness range: 61-65 HRC
2. Square pipe
Specification :F10*10~F300*300 Material :Cr12MoV/Cr12 Tolerance range: flatness +0.03 Hardness range :61~65HRC
3. Rectangular tubes
Specification :F10*20~F120*60 Material :Cr12MoV/Cr12 Tolerance range: flatness +0.015 Hardness range :61~65HRC
Specification for welded tube forms
Common specifications:
Circular tube: Φ Φ Φ 12.7 15.9 9.5 Φ 18 19 Φ 22 Φ Φ 25 Φ 28 Φ Φ 35 Φ Φ 38 to 48 Φ 50.8 to 31.8
Square pipe :F15*15 F19*19 F22*22 F25*25 F30*30 F38*38
Rectangular tube :F20*10 F23*11 F25*13 F30*15 F34*22 F40*20 F50*25
Common specifications:
Round pipe :Φ60Φ 76.2 63
Square tube and rectangular tube :F50*50 F75*45
60 Common specifications:
Round pipe :Φ89 Φ101.6 114
How to judge the quality of the mold
1. Materials used: Cr12MoV high-quality die steel is selected as mold material;
2. Excellent design: adopt the most reasonable forming design principles;
3, hardness range: using high precision CNC machining and true air hardening treatment, the overall hardness of the mold can reach about HRC65°;
4, machining accuracy: CNC system processing, good wear resistance, high precision;